FlashRunner I Series

​

High perfomance programming engine

FlashRunner I series is composed by single site programmers, targeted for production environments.
FRI series are Universal and Fully Upgradeable programmers, which work either in full standalone mode or controlled by a host system.

​

 

Overview

 

• Fastest programming algorithms;

• ATE integration;

• Standalone operations (projects and code images stored on a memory card);

• Controllable by any host system via RS-232 or Ethernet (right to the model);

• Supports most ISP protocols (BDM, JTAG, SPI, I2C, MON, ICC, SCI, etc.);

• Flexible and fully configurable;

• Compact and robust design for production environments;

• Data integrity guaranteed;

• All of the models of the FlashRunner I series have been designed for maximum performance and reliability.

 

​

 

Hardware Features

 

• Power supply input 9 to 24V DC (110/220V AC for the FR01PRO model);

• Five digital I/O lines;

• Two digital I/O or analog output lines;

• Twoprogrammable output voltages (0 to 15V, 0.25A and 0 to 5V, 0.5A);

• One analog input line;

• One programmable clock output;

• Secure Digital memory card (up to 2 GB);

• 512 bytes on-board dynamic memory;

• On-board timekeeper and calendar;

• I/O protection;

• Optoisolated inputs for project selection;

• Two optoisolated command inputs (START and STOP);

• Three optoisolated status outputs (FAIL, PASS, BUSY);

• Optoisolated RS-232 or Ethernet channel.

• FlashRunner’s open architecture makes its firmware easily upgradeable to support both new devices and new features.

​

 

 

Software Features

FlashRunner comes with a Windows utility that allows you to communicate with the instrument and perform the most common operations: send commands, manage SD card files, update the instrument’s firmware, etc.
ASCII-based commands used to control and setup.

Two ways to receive and execute commands:

• Over the RS-232 or Ethernet connection (controlled by a host system (e.g. Windows HyperTerminal);

• Via “scripts” stored in its SD card (Standalone mode).

SD memory card (FAT16).
Unlimitedprojects (scripts).
Log files.